The Scimitar Oryx (Oryx Dammah), also known as the Scimitar-Horned Oryx and the Sahara Oryx, is an Oryx species that was once widespread across North Africa. The Scimitar Oryx was the emblem of the ancient Egyptian Oryx Nome (16th Nome of Upper Egypt) and today is the animal symbol of the Sahara Conservation Fund. The myth of the one-horned unicorn may have originated from sightings of injured Scimitar Oryx. From certain angles, the Oryx may seem to have one horn rather than two and given that its horns are made from hollow bone that cannot be regrown, if a Scimitar Oryx were to lose one of its horns, for the rest of its life it would have only one.
| Mount Type | Oryx Scimmitar, Shouldermount Left Turn – GG338, Oryx, Scimmitar Fullmount – DD133, Oryx, Scimmitar Shouldermount Slight Right – DD132 |
|---|
The Scimitar Oryx is a straight-horned antelope that stands just over 1 m (3.3 ft) at the shoulder. The males weigh 140–210 kg (310–460 lb) and the females 91–140 kg (201–309 lb). The body measures 140–240 cm (55–94 in) from the head to the base of the tail. The tail is 45–60 cm (18–24 in) long and ends with a tuft. They are sexually dimorphic with males being larger than females.
Its coat is white with a red-brown chest and black markings on the forehead and down the length of the nose. The coat reflects the sun’s rays, while the black portions and the tip of the tongue provide protection against sunburn. The white coat helps to reflect the heat of the desert. Calves are born with yellow coats and lack distinguishing marks, which appear later in life. Their pelage changes to adult coloration at 3–12 months old.
Both male and female Oryx have horns, with the females’ being more slender. The horns are long, thin, and symmetrical, and curve backward (a distinctive feature of this species); they can reach 1.0 to 1.2 m (3 ft 3 in to 3 ft 11 in) in both sexes. The hollow walls of the horns are so thin that they can easily break. The female’s udder has four teats. The large, spreading hooves are well adapted to allow these antelope to walk on the sand of their dry habitats. A Scimitar Oryx can live as long as 20 years.
The Scimitar Oryx is a very sociable animal and travelled in herds of two to 40 individuals, generally, led by a dominant bull. This species once gathered in groups of several thousand for migration. During the wet season, they migrated north into the Sahara. Scimitar Oryx are diurnal. In the cool early mornings and evenings, they rest under trees and shrubs, or if neither is available, they dig depressions in the soil with their hooves and rest there. Males fight often, but not for long and not violently. Predators, such as Lion, Leopard, Hyena, Cheetah, Golden Jackal, Vultures, and Cape Hunting Dog, mostly kill weak and young Oryx.
With a metabolism that functions at the high temperatures prevalent in their habitats, Scimitar Oryx need less water for evaporation to help conduct heat away from the body, enabling them to go for long periods without water. They can allow their body temperatures to rise to almost 46.5 °C (115.7 °F) before beginning to perspire. In times of ample supply, Oryx can use fluid loss through urination and faeces to lower their body temperatures to below 36 °C (97 °F) at night, giving more time before reaching maximum body temperature the following day. They can tolerate high temperatures that would be lethal to most mammals. They have a network of fine blood vessels that carries blood from the heart to the brain, passing close to the nasal passage, thus allowing the blood to cool by up to 3 °C (5 °F) before reaching the brain, which is one of the more heat-sensitive organs of the body.
The habitat of the Scimitar Oryx in the wild was steppe and desert, where they ate foliage, grass, herbs, shrubs, succulent plants, legumes, juicy roots, buds, and fruit. They can survive without water for 9-10 months because their kidneys prevent water loss from urination – an adaptation to desert habitats. They can get water from water-rich plants such as the wild melon (Citrullus colocynthis) and Indigofera oblongifolia and from the leafless twigs of Capparis decidua. In the night or early morning, they often search for plants such as Indigofera colutea, which produce a hygroscopic secretion that fulfils water requirements. They eat tuft grasses such as Cymbopogon schoenanthus after rains, but they normally prefer more palatable grasses, such as Cenchrus biflorus, Panicum laetum, and Dactyloctenium aegyptium. When the dry season begins, they feed on the seedpods of Acacia raddiana, and during the dry season, they rely on perennial grasses of genera such as Panicum (especially Panicum turgidum) and Aristida, and browse plants such as Leptadenia species, Cassia italica, and Cornulaca monacantha.
Both males and females reach sexual maturity at 18-24 months of age. Births peak between March and October. Mating frequency is greater when environmental conditions are favourable. The oestrous cycle lasts roughly 24 days, and females experience an anovulatory period in spring. Periods between births are less than 332 days, showing that the Scimitar Oryx is polyoestrous.
Courting is done by means of a mating circle; the male and female stand parallel to one another, facing in opposite directions, and then circle around each other until the female allows the male to mount from behind. If the female is not ready to mate, she runs away and circles in the reverse direction. Pregnant females leave the herd for a week, give birth to the calf, and mate again during their postpartum oestrus; thus, they can produce one calf a year. Gestation lasts about nine months, after which a single calf is born, weighing 10–15 kg (22–33 lb). Twin births are very rare – only 0.7% of the births observed in one study. Both mother and calf return to the main herd within hours of the birth. The female separates herself from the herd for a few hours while she nurses the calf. Weaning starts at 3.5 months, and the young become fully independent around 14 weeks old.
The Scimitar Oryx once inhabited grassy steppes, semideserts and deserts in a narrow strip of central north Africa (especially in Niger and Chad). It was widespread on the fringes of the Sahara, mainly in subdesert steppe, the grassy zone between the real desert and the Sahel, an area characterized by an annual rainfall of 75–150 mm (3.0–5.9 in). This particular oryx is adapted to harsh desert conditions and can survive for months or even years without drinking water.
Planning carefully is the key to a good Scimitar Oryx taxidermy job. When tanning and oiling the hides, the best chemicals and methods in the world are used to make sure they will last for generations. At Lifeform Taxidermy, we carefully choose our forms to make sure they fit well, and we’ll even custom make the forms according to any instruction, you may have in mind, at no extra cost. Full-mount trophies come with standard natural habitat bases that are made just for them. We use only the best materials and our 40 years of experience in the field to give your trophies new meaning. The finished trophies look life-like. When repair is needed, every effort is made to repair cuts and scrapes while keeping bullet damage to a minimum. Skin preparation and storage tips for a flawless Scimitar Oryx trophy.
Take care of your trophy before you bring it to the taxidermist – field preparation is the most important start. As soon as you take the hit on your trophy, it starts to rot, and the heat of Africa speeds up the decaying process. The hunter must not drag the body of the animal from the site where it was shot to the waiting hunting truck. The trophy should be protected from the hot metal bed of the hunting truck with a thick layer of cut grass or leaves.
So that nothing goes wrong, the skinning needs to start right away. Remove all of the meat, fat, dirt, and blood from the skin. Clean the skin well. After that, allow the skin to drip dry for a short time, it should then be salted. It is recommended to soak the skin in a salt solution for at least five hours and ideally overnight. Use about 20 kg of salt per 100 litres of water. After taking the skin out of the solution, salt it while it is still flat and flesh side up on a clean surface. To get the full effect of the salt, it needs to be absorbed into the skin all over, into all the crevice’s, especially around the facial features. Put the skin in the shade with a layer of salt on it. After 24 hours, dry the cape. Fold with the hair and ears in when it’s dry. To stop insect damage, pesticides must be sprayed on the skin and in the storage area.
How you choose an Scimitar Oryx taxidermy mount depends on things like your budget, wall space, and personal taste. When it comes to the creation of a full mount, we find that considerable discussion with the customer yields the best results. This is due to the fact that each form is given a distinct shape and arrangement.
Life-Form Taxidermy will make an exact copy of the skin as soon as they get all of your mounting instructions. All of the skins are tanned and oiled with high-quality products and methods to make sure they are preserved for years. Each skin is put on a manikin to make sure that it fits well. After the eyes and ears are expertly placed, the skin is sewn by a professional. Before making any last changes, the taxidermist waits until the animal is dry. They put the trophies in crates, and the shipping company hired by the client brings them to the client.
Every year, dust the mounts with a soft brush or compressed air to fluff up the hair. Trophies should be protected from common pests by spraying a light mist of normal aerosol surface pesticide around them. Think about preserving your trophy with Mount Medix Africa. This is a product that Life-Form Taxidermy offers.
Keep trophies in a cool, dry place. Daylight makes the mounts fade over time, so artificial light is better. If there’s too much humidity, open the windows or turn on a fan. Due to salt and tan residue, hair can make moisture beads when the humidity is high. Using a tissue that soaks up water will also soak up the salts.
The pricing of any trophy is subject to the costing stipulated per taxidermy order, quantity of trophies and preferred mounting options, along with additional requirements.
Should you wish to receive a quotation prior to the hunt, the taxidermist can generate such for you. Please contact [email protected]
Taxidermy is an art form that involves a complicated step-by-step process to make sure that each trophy looks just right and is of a high enough quality that it will last your whole life.
The time it takes a taxidermist to mount an animal might range from days to weeks, and possibly several months, depending on the quantity of trophies per taxidermy order, the display preferences, and volumes of client trophies to be produced, simultaneously, per production schedule.
This depends largely on the “what, how, when” factors. A taxidermy order also only becomes available for production scheduling upon receipt of the required deposit and trophy mounting instructions.
